Elasto Dip Coatings is high elastomeric solvent based liquid car coating, Product that has an OEM paint finish and you cannot tell apart from the real non-removable automotive paints. Elasto Dip is engineered to protect the surface of your car against scratches, abrasions, debris, dirt, dust, oil, grease, fly rust, corrosion, paint overspray, natural sandblasting etc. Elasto Dip is available in all colours, allowing a high degree of customization with the look and feel of original car paint.
Liquid peel is applied onto your vehicle by means of professional spray equipment and does not involve any adhesives, cutting of material or heat application that may damage the original paint of your vehicle. Liquid Peel is completely safe and protects your vehicle from damage.
ELASTO DIP Coatings shields your car from scratches, dust, debris and other exterior and everyday damage by forming a hard and protective layer over your original paint. ELASTO DIP also preserves the OEM car paint through its stain resistant properties.
Of Course!! Various DIY ( Do it Yourself) customers use our products.., Follow Instructions and tutorial videos which first choose ventilated area, with good air movements, free from dust, moisture, with due care mask and covers tyres, Window, side glasses, Chrome Plates, with Masking tapes, and Paper. Remember, this product is Peelable, so even if you make any mistake, you can peel it off, and try again,
For best application, apply at temperatures between 14°C and 25°C. Avoid applying product if temperature is below 10°C or above 35°C or Moist or Raining
ELASTO DIP Coatings is sprayed with any Air Assisted, or Compressed Air With Needle Size of 1.6 and pressure of 40-50 psi.
First and Foremost it requires thicker coat, with little thicker from the ages, technically it require minimum 800 micron 18-20 Mils of Dried Film, and To Achieve this, it requires nearly 6-8 coats,, Elasto dip can easily last 3+ years
These are the following advantages of ELASTO DIP Coatings:
- Protects your car from abrasions
- Feels like OEM paint
- Available in Hyper Gloss or Matt finish
- Auto-levels for smooth finish
- Supreme clarity
- Air dried finish
ELASTO DIP Colour Protect is more prominent than the regular OEM paint cars. The various pearls and pigments of very high Ultra Violet fastness, that allow you to choose from a wide range of solid colours and colour shifts that give you a premium finish and protection from damages. The advantage of ELASTO DIP Colour Protect is that you can always return to your OEM paint as the product is removable without causing any damage or leaving behind any residue.
There are various colours available for ELASTO DIP Colour Protect. To choose the right colour for your vehicle, contact your nearest ELASTO DIP Coatings authorised applicator.
There are two finishes available in ELASTO DIP Coatings:
- The Super gloss finish by ELASTO DIP Coatings provides one of the highest gloss finishes in the industry.
- ELASTO DIP Coatings also offers a Frozen Matt finish that has a premium satin finish which is smooth and even.
Yes, it is mandatory that your vehicle bodywork is done on all damages before applying ELASTO DIP Coatings in case of any damage to achieve a smooth and even finish.
Yes, a vehicle that has ELASTO DIP coatings on it can be pressure washed as the protective layer is durable and strong.
We recommend regular maintenance, just like how you would maintain your OEM car paint. For advanced maintenance, you may also use any wax or polish over ELASTO DIP Coatings.